Post Construction Cleaning in Dubai
Al-Rahim Technical Services provides post construction cleaning in Dubai — professional residential and commercial cleaning. Pricing is fixed and agreed before work starts, and the job is backed by a written 100% satisfaction guarantee.
Renovation crew finished in your Mirdif home and left fine dust coating every surface, floor to ceiling? Paint spatter on tiles and plaster dust clogging your AC filters? Al-Rahim sends a specialised crew to clear construction debris and dust before you can properly use the space again.
Al-Rahim Technical Services has handled post-construction cleaning across Dubai for 10+ years and is licensed by Dubai Government. We give you an upfront quote before we start based on the scope of the renovation and square footage, so cost is clear from day one.
This service fits Mirdif villa and townhouse owners finishing an extension, renovation, or new-build handover where standard cleaning equipment cannot handle the volume and type of debris construction work leaves behind.
What’s Included
A post-construction clean removes fine dust and debris that regular cleaning tools and products are not built to handle.
- Heavy-duty vacuuming of fine construction dust from floors, vents, and corners
- Paint, cement, and adhesive residue removal from tiles, glass, and fixtures
- Full window and glass door cleaning, including dust film and paint spatter
- AC vent and filter dust clearance to prevent recirculation once the system runs
- Cabinet, shelving, and appliance interior wipe-down of settled dust
- Final detail pass on skirting boards, light switches, and door frames
Why Construction Dust Needs Specialist Cleaning
Fine construction dust from cement, plaster, and drywall sanding is finer and more pervasive than household dust, settling into every gap including AC vents, cabinet seams, and light fixture housings. Regular vacuums and mops spread this dust around rather than fully removing it.
In Mirdif’s villa communities, renovation projects often involve extensions or structural changes that generate more debris than a typical apartment refresh, requiring heavy-duty equipment suited to volume, not just fine dust.
What Gets Left Behind After Renovation Work
Paint spatter on floor tiles, cement residue on grout lines, and adhesive marks from removed protective sheeting are common after tiling or painting work. These need targeted removal methods, not general wiping, or they can etch or discolour the surface underneath.
AC systems are a particular concern: if vents are not cleared of construction dust before the system runs at full capacity, that dust recirculates through the home for weeks afterward.
- Fine cement and plaster dust in vents and corners
- Paint spatter on tiles, glass, and fixtures
- Adhesive or tape residue from protective sheeting
- Debris trapped in cabinet seams and drawer tracks
- Dust film on windows and light fixtures
What Affects the Price of Post-Construction Cleaning
The scope of the renovation is the main factor: a single-room extension needs far less time than a full villa renovation touching every floor. The type of work matters too, since heavy demolition or tiling generates more dust than a paint-only refresh.
Whether AC systems, light fixtures, and window exteriors are included in the scope also affects the quote, and we confirm this during our initial walkthrough of the site.
Our Post-Construction Cleaning Process
We start with a dry dust removal pass using heavy-duty vacuums across floors, vents, and corners before any wet cleaning, since wet-wiping fine dust first can smear it into a paste that is harder to remove. AC vents and filters are cleared early to prevent dust recirculating mid-clean.
Once dry dust is cleared, we move to targeted spot removal for paint, cement, and adhesive residue, followed by a full wet clean of floors, glass, and surfaces, finishing with a detail pass on skirting boards and switches.
Why Choose Al-Rahim for Post Construction Cleaning
10+ Years in Dubai
10+ years of hands-on experience across Dubai
Licensed by Dubai Government
Fully licensed and insured on every job
Guaranteed in Writing
100% satisfaction guarantee, in writing
Residential & Commercial
Technicians equipped and experienced for both residential and commercial properties
How It Works
Describe the Job
Call or book online and describe the post construction cleaning you need
Fixed Price On-Site
A licensed technician inspects the job and confirms a fixed price before starting
Done & Checked Together
We complete the work and check it with you before we leave
Frequently Asked Questions
How soon after renovation work finishes can you clean?+
We recommend waiting until all dust-generating work, including sanding and painting, is fully complete before scheduling, since cleaning too early means dust settles again from ongoing work nearby.
Will construction dust damage my AC system if not cleaned?+
Fine dust drawn into AC vents and filters can clog the system and recirculate dust through the home once it runs at full capacity, so vent and filter clearance is a priority step in our process, not an afterthought.
Can you remove paint spatter from floor tiles?+
Yes, we use gentle scraping and tile-safe solvents to lift paint spatter without scratching or dulling the tile surface, tested on a small area first if the flooring type is unfamiliar.
How long does post-construction cleaning take for a villa extension?+
A single-room extension typically takes 4 to 6 hours. A full villa renovation touching multiple rooms and floors can take 1 to 2 full days depending on the extent of the work.
Do you clean the AC system itself or just the vents?+
We clear visible dust from vent covers and accessible filters as part of the clean. Deeper AC duct cleaning or servicing is a separate specialist job we can also arrange if the system needs it.
Is post-construction cleaning the same as move-in cleaning?+
They overlap but post-construction cleaning deals specifically with active renovation debris like cement dust, paint spatter, and adhesive residue, while move-in cleaning is broader, covering a unit’s general readiness for occupancy.