Self-Leveling Compound in Dubai
Al-Rahim Technical Services provides self-leveling compound in Dubai — supplied, installed and finished level, durable and clean. You get a transparent, fixed quote before any work begins, with a 100% satisfaction guarantee in writing.
New tile already cracking in your Al Nahda apartment, or vinyl planks lifting at the seams? A rough or uneven concrete base underneath is usually the cause, and Al-Rahim’s licensed technicians pour self-leveling compound to fix it, with an upfront quote before work begins.
Al-Rahim Technical Services has worked on floors across Al Nahda and Dubai for 10+ years and is licensed by Dubai Government, with every job backed by a 100% satisfaction guarantee in writing. Al Nahda’s mid-rise apartment blocks were built in phases over many years, and slab quality varies noticeably between older and newer towers in the same street.
This service is for anyone about to lay tile, vinyl, laminate, or engineered wood on a floor that is not perfectly flat. We explain, before we start, exactly how much compound the room needs and why.
What’s Included
Self-leveling compound work with Al-Rahim covers the full prep-to-pour process, not just mixing bags.
- Laser or straightedge survey to measure the floor’s high and low points
- Cleaning and degreasing of the existing slab surface
- Crack filling and priming so the compound bonds properly
- Correct compound mix ratio for the room’s dip depth
- Controlled pour with a gauge rake for an even spread
- Curing time confirmation before handover for tiling or flooring
What Self-Leveling Compound Actually Fixes
Self-leveling compound is a cement-based liquid mix that flows across a floor and settles into a flat plane using gravity, correcting dips up to roughly 10mm in a single pour. It is the standard fix before laying tile, engineered wood, or vinyl on a slab that is not quite flat.
It is not a structural repair. If a slab has a genuine crack, spalling, or a slope from settlement, that needs addressing first, and we flag it during the survey rather than pouring over a hidden problem.
Types of Compound We Use
Standard cement-based compound suits most residential rooms and gives a strong, flat base within a day or two. Fast-set formulas cure in hours rather than days, useful in Al Nahda apartments where residents cannot vacate a room for long.
For rooms with higher moisture risk, such as near bathrooms or ground-floor units, we use a fibre-reinforced or moisture-tolerant mix that resists micro-cracking as it cures.
What Affects the Price in Dubai
Cost depends on floor area, how deep the dip is, and which compound grade the room needs. A single bedroom with a shallow 3mm variance is a quick, low-cost pour compared to an open-plan living area with an uneven 12mm dip.
Apartment access in towers also plays a role. Materials have to go up by lift and be mixed in small batches on-site, which takes longer than a ground-floor villa job. We quote after measuring, so there are no surprises.
- Floor area in square metres
- Depth of unevenness across the room
- Standard vs fast-set vs moisture-tolerant compound
- Tower access and floor number
Self-Leveling Compound for Al Nahda Apartments
Al Nahda’s tower blocks range from older buildings with visibly uneven concrete to newer towers with tighter tolerances. We check the specific unit rather than assuming the building age tells the full story.
Because many Al Nahda residents are tenants or landlords managing turnover between leases, we offer fast-set compound options so a room can be ready for new flooring within the same day, minimising downtime between tenants.
Why Choose Al-Rahim for Self-Leveling Compound
10+ Years in Dubai
10+ years of hands-on experience across Dubai
Licensed by Dubai Government
Fully licensed and insured on every job
Guaranteed in Writing
100% satisfaction guarantee, in writing
Residential & Commercial
Technicians equipped and experienced for both residential and commercial properties
How It Works
Describe the Job
Call or book online and describe the self-leveling compound you need
Fixed Price On-Site
A licensed technician inspects the job and confirms a fixed price before starting
Done & Checked Together
We complete the work and check it with you before we leave
Frequently Asked Questions
How thick can a self-leveling compound pour be?+
A single pour typically corrects up to about 10mm of unevenness. Deeper dips need a build-up pour in stages or a screed instead, which we determine during the laser survey.
How soon can I walk on the floor after pouring?+
Light foot traffic is usually safe within 4 to 6 hours with standard compound, sooner with fast-set mixes. We confirm exact timing based on the product used and room conditions on the day.
Does self-leveling compound work over old tile?+
Yes, provided the existing tile is sound, clean, and properly primed first. Loose or cracked tiles need to come up before we pour, otherwise the compound will crack along with them.
Can I choose fast-set compound to save time?+
Yes, fast-set compound cures in hours instead of days and is a common choice for occupied Al Nahda apartments. It costs a little more per bag but reduces the time the room is out of use.
Will the compound crack under a heavy wardrobe or fridge?+
Properly cured compound with the correct mix ratio handles normal household loads without cracking. We reinforce with fibre additive in rooms that will carry heavier furniture.
Do you handle both the compound pour and the tile installation?+
Yes, our team can carry out the leveling and the follow-on tile, vinyl, or wood flooring installation as one job, quoted together upfront.